Metal Sculptures for Artists

Fabrication metal sculptures for artists, since 1999

Since 1999, art project has been producing metal sculptures for artists, architects, and public commissions. Whether it’s steel, stainless steel, Corten steel, brass, or aluminum, we transform a model, a drawing, or a 3D file into a finished, durable sculpture ready for installation. Our 2,000-square-meter workshop near Lyon houses the design office, the production fabrication , and the installation team.

Metal sculptures

From the artist's model to the finished sculpture

A metal sculpture rarely begins with a fabrication plan. It begins with a model, a sketch, an image, or an idea. Our role is to translate that idea into a tangible form, without betraying it, through a technical support for the artist at every step.

1. Study and Feasibility:

Project analysis, selection of metal, thicknesses, and joints, followed by an initial cost estimate to confirm technical and budgetary feasibility.

2. Modeling and Engineering:

3D scaling, engineering calculations, internal structure, and anchor points prepared by our engineering department.

3. Prototypes and samples:

Approval of finishes, colors, and details with the artist before launching the fabrication.

4. Fabrication on sculpture:

Cutting, bending, and rolling; welding; seam finishing; and final finishing—all performed in our metal shop.

5. Dry run:

The sculpture is fully assembled in our workshops using a 10-metric-ton overhead crane before it is shipped. This inspection is essential for monumental works.

6. Shipping and Installation:

Custom-made crates, logistics in France andinternationally, followed by on-site installation by our own teams. Throughout the project, the artist works with a single point of contact and approves each step.

Large-scale art fabrication: Huang Yong Ping – Empires (Monumenta)
Large-scale art fabrication for MONUMENTA – Huang Yong Ping

Steel, stainless steel, Corten steel, brass, aluminum: choosing the right metal

The choice of metal depends on the artistic intent, the exhibition venue, and the expected lifespan. Our engineering firm advises the artist from the design phase onward, and we also combine metal with the wood, glass, the neon or the composites for hybrid works.

Steel sculpture:

Whether raw, painted, or powder-coated, steel is suitable for large-scale forms, load-bearing structures, and painted sculptures.

Sculpture made of mirror-polished or brushed stainless steel:

Stainless steel is ideal for reflective sculptures, outdoor settings, and high-traffic areas, particularly as part of the “1% Art” program.

Corten steel sculpture:

Its stabilized rust patina makes it the ideal metal for outdoor sculpture, landscaping, andpublic art.

Brass sculpture:

Whether gilded, patinated, or polished, brass is ideal for fine pieces, decorative details, and interior design elements, such as limited-edition items.

Aluminum sculpture:

Whether lightweight, raw, brushed, or painted, aluminum is well-suited for suspended pieces, large surfaces, and works that travel—often shaped by bending and rolling.

Precision art fabrication of Ma montagne by Camille Henrot
brass sculpture - Franck Scurti

Finishes: mirror-polished, brushed, patina, powder-coated

The finish often makes thework. Flawless mirror-polished stainless steel, a uniform patina, or an exact color require trial and error and a high degree of precision.

Mirror-polished and brushed:

Made of stainless steel and brass, with welds completely ground down to create a seamless surface, crafted in our metal workshop.

Patinas:

Natural or applied, on Corten steel, steel, and brass, depending on the effectthe artist desires.

Painting and powder coating:

In the exact shade chosen by the artist, with protection suitable for both indoor andoutdoor use.

Validation samples:

Created prior to fabrication, in collaboration with our prototyping department, to ensure the final result matches the original vision.

Artwork by artist Le Gentil Garçon - Eclipses

Sculptures for Outdoor and Public Spaces

An outdoor sculpture must withstand wind, temperature fluctuations, and the elements, while remaining safe for the public. Our engineering firm takes this into account from the design phase onward.

Structure and Stability:

Calculation notes, wind resistance, and the design of foundations and anchors, as they relate to our load-bearing structures.

Sustainability:

Selecting the appropriate metal and protective coating for the site, and designing details that prevent water from pooling, to ensure the longevity of urban artworks.

Compliance:

Coordination with audit offices and compliance with public procurement requirements, particularly regarding the 1% arts mandate.

Large format:

For very large-scale works, discover our monumental productions and our expertise in on-site installation.

Specialized fine art handling and transport by art project

Frequently Asked Questions

Can you create my sculpture based on a model?

Yes. We start with a model, a drawing, or a 3D file. We model the sculpture to its final scale and confirm the proportions with you—using a prototype if necessary—before beginning production.

How much should you budget for a metal sculpture?

The budget depends on the dimensions, the metal, the finish, the engineering, and the installation. Our engineering department will provide a detailed cost estimate after reviewing your project.

What are the processing times at fabrication ?

They vary depending on the size and complexity of the work. We establish a schedule at the planning stage, taking into account the exhibition or opening date, even for monumental projects.

Can your sculpture be installed outdoors?

Yes. We select the appropriate metal and protective coating, and we design the structure and anchors for long-term outdoor use, in accordance with the requirements forpublic art.

Are you moving abroad?

Yes. We handle packing, transportation, and customs formalities, and our teams travel to install the artwork. Learn more about ourinternational projects.

A metal sculpture project?

Send us your design, sketches, or specifications. Our engineering department will get back to you with an initial technical and cost analysis. To learn more about our metalworking techniques, see our page fabrication featuring metal artworks.